Plain rack for your kitchen
This smart little plate rack is just a bunch of dowels and some trim. But what kills is getting the design right. Because if you don't engineer it well, the rack could be too big, so the plates sink too low in the rack, or too small, so the plates tip over, or smack into the wall and chip. Oh there are endless ways to screw up and I've found the obvious ones so you don't have to.
|
| |
Plate - Amish Rack
This adaptation of an Amish-style plate stand is assembled without traditional fasteners. It is held together with glue and by the principles of tension and compression.
|
| |
Plate - Arts and Crafts Rack
This craftsman-style piece is a great way to showcase special china or a vintage plate collection
|
| |
Plate Rack
This wall-mounted plate rack in Tassie oak, stores up to 24 plates.
|
| |
Plate Rack
Put your plates and bowls right where you need them: on your kitchen counter
|
| |
Pot Rack
If you have ever owned an overhead pot rack you know how useful they are. You probably wished you?d discovered them sooner! Now you can build this beautiful kitchen feature at very low cost, using simple tools.
|
| |
Quilt Rack
Looking for an attractive way to show off a favorite quilt? This easy-to-build quilt rack will make a handsome display, whether you plan to keep it yourself or give it to a quilter you know. It's a perfect project when bad weather might have you house- or workshop-bound. The lumber choices include pine, poplar and oak, depending on how much you want to spend on material. The rack may be painted, s...
|
| |
Revolving Tool Rack
This free woodworking plans and projects page is an archived page of a woodworkers DIY plan. It was a dark and dreary day and the weather outside wasn?t too great either when I realized something must change with the way I stored my handtools. They were hanging on walls, languishing in drawers and loafing in cabinets. And, the trend would have continued if I hadn?t designed this snazzy rack to sto...
|
| |
Rocket Rack
Build your own using the information, materila list and hardware list provided.
|
| |
Sanding Belt Storage Rack
I used to store my sanding belts in a drawer. But every time I needed to change a belt, I ended up emptying out the entire drawer to find the one I wanted. To avoid this, I made a wall-mounted rack for my sanding belts.This archived free woodworking plans and woodworkers projects information is courtesy of the WoodworkingTips web site.
|
| |
Saw Tool Rack
My saw rack is of a very simple design. I took a scrap board (of oak in my case but any wood will do) to work with.
|
| |
Sewing Thread Rack
A plan to build a sewing thread rack.
|
| |
Shade Cloth Diy Awning Designs
This low cost shade structure for outdoor living around the home may be constructed using shade cloth and a bit of lumber.
|
| |
Shade Cloth Diy Patio-covers
A cutwood pergola covered with shade cloth gives stylish protection for entertaining and outdoor living. information courtesy of www.Alnet.co.za
|
| |
Shade Cloth Diy Patio-enclosures
This attractive roller blind is perfect for an apartment porch or patio. Fitted with a simple pulley system, and anchored to the balustrade coping, it provides protection from both wind and sun. Whilst dimensions are given for the blind pictured here, your material lengths will, of course, depend on the height of both your ceiling and balustrade.
|
| |
Sheep Feed Rack
This leaflet gives details for building a portable feed rack, for silage, baled or loose hay. The unit is 900 mm (2 ft) wide, by 2400 mm (8 ft) long, designed to feed from both sides. Solid end and bottom panels of exterior plywood or aspen flakeboard give rigidity and keep the feed high and dry. Vertical plywood spacers along the sides help keep feed inside the feeder, reducing waste. The unit is...
|
| |
Spice Rack
This classic kitchen accessory has three shelves for displaying bottled spices and drawer for storing fresh herbs. Crafted from solid mahogany, the sides are cut at the band saw and routed using a template. The shelves are joined to the case with dowel joinery and the back panel is glued into a rabbet. The drawers are fashioned out of contrasting maple. Finally, a piece of highly figured maple bur...
|
| |
Spice Rack
Plan to make a spice rack.
|
| |
Spice Rack
Quick and easy, can be built in an afternoon.
|
| |
Spice Rack
This DIY kit brought to you by Prego will show you how to make a spice rack.
|
| |
first
previous