Crooked Bedside Lamp
Plan to build a crooked bedside lamp.
|
| |
Electric Hydroplane Model Toy
Hydrofoils have been around for some time, but even so, nothing on the boating scene draws every eye like a hydroplane lifting out of the water as it gains speed.
|
| |
Electric Motor Basics
Electric Motor Basics Electric Motors There are many types of electric motors, some smaller than a human hair others large enough to power a locomotive. For the purpose of this page we will be discussing induction motors which are typically found on most workshop machinery such as air compressors, drill presses, table saws, band saws, jointers, shapers and lathes. These types of motors have no bru...
|
| |
Electric TV Cabinet
Basic info on constructing this woodworking project to house an electric lifting mechanism for a hideaway television. Info courtesy of HGTV.
|
| |
English Style Lamp
Plan to build an english style lamp.
|
| |
Falling Water Lamp
Probably the most important part of this project is selecting the best walnut for the shade. It doesn?t take a lot of wood (in fact, you might be able to build this project from your scrap pile), and I resawed the pieces to get a bookmatched shade. If you?re a beginning woodworker, this is the trickiest part of the project.
|
| |
Floor - Turned Lamp
This advanced turning project uses both faceplate and spindle-turning techniques. You may have to register as a member at the DeltaMachinery site to view this free woodworking plan.
|
| |
Floor Lamp (Arts and Crafts from Pm)
This substantial floor lamp was designed to tastefully complement our rocker, bookcase and side table. It's just the right height to shed light on your reading material as you rock away in peace and quiet. It also casts plenty of light elsewhere, so you can use it as a good source of ambient illumination. But you don't have to build all the other pieces in this collection to make use of this lamp....
|
| |
Floor to Ceiling Bookshelf
Plan to build a floor to ceiling bookshelf.
|
| |
Garden Post and Wire Trellis
This free woodworking plans and woodworkers projects information is courtesy of the Black and Decker web site.
|
| |
Install a Wooden Ceiling
If you are looking to update an existing ceiling, consider a beadboard or wood ceiling. These ceilings were used long before plaster or drywall ceilings became popular and offer a warm feel to any room.
|
| |
Japanese Style Lamp
Build your own japanese style lamp.
|
| |
Jigs and Fixtures for The Band Saw
In this special episode of DIY Wood Works, host David Marks discusses and demonstrates the uses of jigs and fixtures in woodworking. In this segment, he features jigs and fixtures used in conjunction with the band saw, disc sander and drill press.
|
| |
Jigs and Fixtures for The Table Router and Plunge Router - Diy Netw
In this special episode of DIY Wood Works, host David Marks discusses and demonstrates the uses of jigs and fixtures in woodworking. In this segment, he demonstrates the use of some jigs for the table router. He also creates a specially made jig that can serve as an inexpensive alternative to the multi-router.
|
| |
Jigs and Fixtures for The Table Saw
In this non-project episode, host David Marks explores the benefits and uses of a variety of different jigs and fixtures and builds a few examples. He includes tips on using a dovetail jig, a miter jig, and custom drill press jigs. He also highlights fixtures like the cross-cut sled and finger boards, and shares tips about making woodworking safer and more precise.
|
| |
Lamp (Mission Style)
Amateur Woodworker: Lamp Mission-Style Lamp The majority of lamps that are available on the market involve the use of a lathe. However, turned lamps are not the only solution and, as this lamp proves, it is entirely possible to build an attractive lamp without any special tools whatsoever. This lamp is heavily influenced by the Mission-style, a style that is increasing in popularity at present. Th...
|
| |
Lathe Flexible Lathe Lights + New Dust Deflector Light Unit
For many years I have got by with using, the almost Woodturners Standard Light, the ?Angle Poise Lamp? and over the years have got through a number of these as the Plastic Parts wilt under the residue from Finishes and Polishes, so when the current Lamp required another temporary repair job I decided to re-think my whole Lighting Arrangement around the Lathe.
|
| |
Lathe Tool Handle for Use With Various Turning Tools + Miniature Tools + Wire for Decorative Burning
All of these Tools had one thing in common they were made from 8mm ? Steel [ 5/16?] and therefore could be fitted into a common Handle and therefore reducing the Storage Space I would require for this group of Tools. The Picture below shows the finished Tools, I couldn?t resist making a second after the success of the first which only had one short coming, it was not long enough to give the degree...
|
| |
Making a copper lamp
To explore your uniqueness,
try making your own whimsical copper lamp
|
| |
Maypole Lamp
Nice for the nursery or child?s room, this little lamp is easy to build.
|
| |
first
previous