Food Processing Attachments Holder
Free up bench space with a nifty holder for all those whizzy attachments from your food processor.
|
| |
Front Porch Mailbox
Build your own mailbox.
|
| |
Garden Greetings Stake
These Greeting Stakes make great house warming gifts. They can be made mostly from scrap pieces of wood found around your wood shop. They take a little creativity but the results are very satisfying.
|
| |
Glue Bottle Holder
I always seem to be forgetting where I set my glue bottle down last. So I came up with a quick and inexpensive solution.
|
| |
Halloween Bat Napkin Holder
A fun scrollsaw pattern from one of the most widely known scrollsaw plan developers. This pattern is ? 2005 - The Winfield Collection, Ltd.
|
| |
Handsaw Holder Tool Cabinet
A plan to build a handsaw holder tool cabinet.
|
| |
Handy Scraper Holder
I?ve eliminated both of these problems (sore hands and heat build up) with a simple scraper holder, shown in the photo
|
| |
Heart shaped Napkin Holder
Heart Napkin Holder This napkin holder is a great beginner project, minimum tools required, handsaw and coping saw will do the job.
|
| |
Hose Cord Holder
Keep your shop-vacuum hoses in check with this hose/cord holder from IDEA SHOP 3
|
| |
Indoor Mailbox
When we have outgoing mail we usually lay it on the hall table which doesn?t look very good and sometimes gets lost in the shuffle. To help resolve this problem we came up with a neat little inside mailbox. It?s simple, good looking and functional.
|
| |
Knife Holder
The Knife Holder has room for five kitchen knives.
|
| |
Lathe Cross Slide Cover + Tool Tidies + Magnet #2 + Laminated Data Sheet Holder + Bandsaw Blade Stor
The Cross Slide [Banjo] on the Hegner Lathe I use, has what I would term an ?open slot? design which is common on a number of other Lathes and therefore this idea should be adaptable to many Lathes.
|
| |
Lathe Fingernail Jig + Skew Grinding Jig + Tip Holder for Easy Grinding
The Fingernail Grind Profile for Gouges is one of the innovations of the last decade that has enabled Woodturners to improve the scope and versatility of the Gouge, and has spawned a number of Jigs to enable anyone to convert the Gouge to this profile and then Sharpen it on a consistent basis.
|
| |
Lathe Platform + Ball Cutting Jig + Router Holder Sled + Copying Sled Part i
This Article will be in three parts with the first two parts covering several Holders for various items used to Decorate, Form, Copy or Drill Items held in the Lathe.
|
| |
Lathe Platform + Ball Cutting Jig + Router Holder Sled + Copying Sled Part ii
In Part II of this article I describe three Holders, with four uses, that I have developed for use with the Sled described in Part I, these are the Dremel Holder, A Ball Cutting Jig and A Drill Guide.
|
| |
Lathe Platform + Ball Cutting Jig + Router Holder Sled + Copying Sled Part Iii
The Base Board is the Hub of the System and you need to think through all the things you want to achieve and also in the future, you also have to consider the fact that the Board will extend well beyond the Lathe so you do not want it to be too Large and then again you do not want it to be so Small that you are limited to the use of the Jigs previously described.
|
| |
Lathe Platform + Ball Cutting Jig + Router Holder Sled + Copying Sled Part iv
In the final part of this article I detail the various ways of for Pivoting, Guiding and Fixing the Sled in its various applications. I have found the concept to be very flexible in both design and use and that most eventualities are covered within the design and should new requirements be needed then these are easily made based on the basic concept.
|
| |
Lathe Tool Rests + Tool Rest Holder
Tool Rests to your own designs can offer you a greater flexibility in your Woodturning and are relatively easy to make for very little cost.
|
| |
Letter and Mail Holder
The template to create your own wood Letter Holder follows this introductory page. The final piece is about 11-1/4? tall, 13-1/8? wide and 3-1/2? deep.. When the template is pieced together, all that is necessary is to cut on the outer border to complete the general shape. Routering the top edge will create a soft bevel for a more complete, finished look. Sand and paint like the finished sample sh...
|
| |
Letter Box
A handy project that will help keep your letters organized by David and Jeanie Stiles. This simple box, with its pleasing shape and practical size, can store not only letters but bills, envelopes, stamps, almost anything that accumulates on your desk or dresser.This archived free woodworking plans and woodworkers projects information is courtesy of the FamilyFun web site.
|
| |
first
previous
