|
12 Beginners Wood Carving Patterns
|
|
Using the ?Keep It Super Simple? idea, L.S. Irish from the CarvingPatterns web site offers this free woodworking carving patterns.
|
| |
|
16th Century German Wheelbarrow
|
|
Although it would be possible to give a set of plans that spelled out in detail all of the measures and sizes needed to build a wheelbarrow, in this case I think, it is more important for the builder to grasp some of the engineering considerations involved in the construction of the wheelbarrow and modify the plans in such a way as to make the barrow the most suitable for them
|
| |
|
16th Century Wheelbarrow
|
|
It?s not entirely clear when wheel barrows came into common usage, but they appear in European art by the 13th century. The Chinese had wheel barrows much earlier, though their design put the wheel under the cargo box instead of in front of it
|
| |
|
4-corner Miter Clamp Jig
|
|
This easy-to-build miter clamp and one handscrew are all you need to make perfect frames
|
| |
|
A Place in The Woods
|
|
The art of building a shelter with log scraps and a little experience, including skin, rack and stack, laying out a log, glossary of terms, linking logs, illustrated instructions.
|
| |
|
A Sharpening System for Woodturning Tools
|
|
This easily made sharpening system is made up of two jigs. One is a general jig for sharpening the full range of turning tools. The other is a jig for creating a long grind on gouges. The plans are made up of 12 pages of dimensioned diagrams, assemby views and step-by-step instructions.
|
| |
|
A Shooting Board for End-grain
|
|
This has a fairly complex construction since I wanted it to be light to handle - I keep it next to my sawing board.
|
| |
|
A Versatile Shuteing Board
|
|
This board is intended for people who have limited need of specialized boards, though they may soon wish that they have at least a pair.
|
| |
|
Accessory Table Clamp
|
|
This idea came to me after I had some movement of the router table that comes with the Ryobi BT3000 table saws.
|
| |
|
Accurate Cut Circular Saw Box
|
Sometimes it?s the little things?like making a square cut in a reasonable amount of time without fancy equipment?that trip up your project. Even with a handheld circular saw, it?s no picnic. In fact, without experience, making accurate cuts can be more difficult than with a handsaw, at least until you build a sawbox. Control is what this custom sawbox delivers.
|
| |
|
Adjustable Miter-Saw Stop
|
|
This handy stop grips tightly and is easy to adjust, so you can lock in crosscuts. A spacer the same thickness as the saw?s auxiliary fence is the key.
|
| |
|
Adjustable V-block System
|
|
Plan to build an adjustable V-block System.
|
| |
|
Adjustable-height Assembly Table
|
|
Cutting Diagram only. This project appears in ShopNotes #60. Now sold only in Hardbound Edition - Volume 10 ShopNotes Back Issues 55-60 ? 200 pages ? 18 projects ? 262 tips & techniques.
|
| |
|
Alanlacer.com - Woodturning Learn Make a Sharp Turn to Woodturning Learn
|
|
FIRST, turn a prototype leg. Place your prototype leg directly behind the blank for each final leg. By sighting along the upper horizons of both pieces, you?ll simplify the process of repeating specific shapes.
|
| |
|
Alignment - for Face Gluing Jig
|
|
When gluing two or more pieces face to face (like making a set of thick legs for a project), they tend to slip out of alignment as you tighten the clamps. Here is one solution
|
| |
|
All Wood Collet Chuck
|
|
An earlier article in More Woodturning on turning wine stoppers got me thinking about collet chucks. I wondered if I could make one entirely out of wood. I thought this would be just an exercise to see if I could do it, but it surprised me with its usefulness. Although the All Wood Collet Chuck doesn?t have the holding power and range of wooden jaws mounted in a scroll chuck, it does have adequate power for turning tops, wine stoppers, and the odd bit of dowel.
|
| |
|
Ammo Block
|
|
A block used in reloading rifle shells. Design calls for aluminum, but hardwood may be substituted.
|
| |
|
Angle - Adjustable Jig
|
|
Make this simple tool for your drill-press table and you?ll never have to eyeball the angle of a hole again
|
| |
|
Angle Drilling Jig
|
|
During a recent project, I needed to ?toe-screw? several pieces together -- drive the screws in at an angle, in other words. My solution was to make a simple angle-drilling jig
|
| |
|
Angle Rest, Groover Jig and Arbortech Mini Carver Guide
|
My reason for making an Angle Rest was born out of a need to have a means of holding Jigs or Guides for Projects that had an element of Repetitiveness involved, in particular an idea I had for a Deep Grooving Guide.
|
| |
